How To QuiltStitch In The Ditch Quilting

Stitch in the ditch quilting is the name given to stitching along the seam lines of the pieced quilt blocks. As with free motion machine quilting, this is completed from the best of the quilt with the pattern of the quilting showing up on the quilt backing. You will want a walking foot machine foot, a pair of quilting gloves and loads of patience. There are a few issues that you need to think about before you start quilting: Do you want the stitch in the ditch quilting to stand out or blend in? It is far more usual to use a blending color thread for the best, but you could wish to use a color that stands out on the quilt backing to showcase the quilt style. It is fine to use a distinct color thread in the bobbin. Just before you begin quilting, be clear about the pattern that you are going to use: do you want to stitch in the ditch along every single seam, just outline a specific pattern in the quilt blocks, or even just outline the quilt block itself? Check your stitch length. The norm is 12 stitches per inch, a small longer than everyday sewing stitch length. Adjust the sewing machine tension. This is most likely the single most essential factor in helping to achieve good machine quilting results. Since of the thickness of two layers of fabric plus batting, the auto tension on your machine is unlikely to give the greatest results. Make up a practice block of the three layers utilized in your quilt and sew a line of stitching. Look at the back of this sample block. Chances are you will not like what you see as the stitching will be too tight, so loosen the tension and try once again. Maintain experimenting until you really feel that the appear of the stitches on your quilt leading and backing are giving the look that you want for your quilt. how to make a tshirt quilt dvd

Quilting with stitch in the ditch Now you can start quilting with stitch in the ditch on the quilt itself. Put on your quilting gloves: they truly do aid to quit your fingers sliding on the fabric. Begin in the middle of the quilt. This will involve rolling the quilt to the correct of the middle so that it fits neatly into the space on your sewing machine. Spot the quilt so that the needle will come down on the seam line. Begin sewing, attempting to maintain your eye on the seam feeding into the machine rather than on the needle itself. It’s incredible how your eye is drawn to watch the needle going up and down, which does not truly aid you preserve a straight line at all. Soon after a couple of inches of sewing, quit the machine and reach round for the trailing end of thread. Pull gently on the thread so that the bobbin thread begins to pull by means of to the quilt leading. Making use of a pin, pull the bobbin thread proper via and tie a double knot with the top thread. This will secure the threads without having having to use back stitching. Do this at the beginning of each and every line of stitch in the ditch or you will finish up with trailing threads all over the location, acquiring caught up in the subsequent line of stitching. Continue sewing along the seam lines until you reach the edge of the quilt. Take your quilt out of the machine and tie off the ends of the threads. Returning to the middle of the quilt, repeat the method with a new line of stitch in the ditch quilting going from the middle to the edge. Attempt to quilt in the exact same direction as prior lines to avoid your quilt backing puckering slightly. Quilting with stitch in the ditch is a marvelous approach of quilting in its own correct but also a fantastic confidence booster just before you attempt free motion machine quilting.

Back to blog